PoolControl 3 Version 2

T&A Compatible

Standard PoolControl3 for T&A and Sirem motors

Power supply 230v mono, Max 16A, 3680Watt

  • Build-In Display (Can be used offline)
  • Pool cover control up to 240W, speed steplessly adjustable.
    • Control output -> cover running
  • Output LED lighting 12v 150w
  • 230V filter pump output. 
    • Control output automatic backwash (Potential-free contact NO).
    • Control output -> Pump status / pump running
  • Pool Water heating control.
    • Frost protection
    • Control output heating appliance (Potential-free contact NO).
    • Control output water-flow solar panels (Potential-free contact NO).
    • Input PT1000 Water temperature (temp. sensor).
    • Input PT1000 air temperature (temp. sensor).
  • Input for water level monitoring. (float)
    • Water valve output 230V.
  • EMS inputs
    • Filter pump
    • heating

Options:
  • Remote control 2 channels (cover, LEDs). (Order code:
    AT-016006)
  • 4 x additional outputs that can be freely used or VS-pump control (Order code: AT-016010)
    • configured and controlled in the app

How to callibrate the cover with the PoolControl App

To control PC3 and PC3ECO trough the App, PC3 needs a hardware (RJ45) connection to the internet to be able to control it from you mobile phone


Click the PDF to find out more about the different ways to get internet to your PoolControl3.
PC2 Internet connectio guide.pdf

Set the Thermal safety by turning the wheel to the value found on the Filter pump's motorID-plate.

Motor ID-plate example.

This message will appear in the app after the Therminal safety for the filter pump activates.

PC3 can control VS-Pumps (Filter pumps with the frequenty drive build-in) trough our optional relais-set (RELSET) with a jumper to alter the function of the RELSET

Please refer to the documentation on the right ->

Relais module as VS pump control manual.pdf

Quick Connection guide

ENG A4 Connection Guide Sticker PC3-TA-V2.pdf

PC3 or PC3ECO in combination with our dosing unit

On our standard PC3 and PC3ECO control boxes without a built-in dosing unit, the settings and menu items for the dosing unit are switched off.

We do this to prevent cluttering the display with settings and info that is irrelevant.

When using our PC3 or PC3ECO control boxes in combination with our Dosing unit the availability of the dosing unit settings have to be switched on. 

The Video explains how to do that.


Switching on the dosing settings on display.mov

Electrical schematics

PC3-TA-V2 Electrical Diagram.pdf

PC3-TA Parts cheat sheet

PC3-TA Parts Cheat sheet.pdf

PT1000 Temperature sensors used for PC3

PT1000

PT1000

Trouble shooting PT1000:

You can measure the resistance of the sensor with an Ohm-meter.
A good PT1000 will show +/-1000Ω at 0°C, +/-1039 at 10°C, +/-1078 at 20°C, +/-1117 at 30°C
Klick here for the complete temperature vs resistance value table.

App Manual

PC2 App Manual.pdf

App password reset after pool startup. (Dealers / Technicians)

PC2 Dealer logon-reset procedure.pdf