PoolControl One T&A

Compatible with T&A motors

PoolControl ONE
Power supply 230v mono, Max 16A.

  • Full color touchscreen in cabinet door.
  • Remote control 2 channel (cover, LEDs).
  • Pool cover control up to 240 Watt, Sirem and T&A motor compatible
    • Cover status potential free output. (Comm., N.O., N.C.)
  • Output LED lighting 12v 35w. (White or Multicolor) (150W "AP" versions)
  • Output filter pump 230V.
    • Auxiliary start input
    • Output UV lamp.
  • Water heating control.
    • Frost monitoring
    • Output circulation pump 230v.
    • Control output (Potential-free contact NO).
    •  Input PT100 (temp. sensor).
  • Input for water level monitoring.
    • Output water valve 230v.

Quick Connection guide

Before you start!
Set the filter pump's thermal safety to the nominal current marked down on the ID-plate of the pump's motor. ("In" or "A")

A little side note: A 230V UV-lamp can be connected to terminals 3 & 4 Along with the 230V Filter pump.
If you do so, please remember to reset the filter pump's thermal safety to the nominal current of the filter pump + nominal current of the UV-lamp.

Set the Thermal safety by turning the wheel to the value found on the Filter pump's motorID-plate.

Motor ID-plate example.

ENG CGS PCONE-TA.pdf

Electrical schematics

Schema PCONE-TA.pdf

PT100 Temperature sensors used for PC1

PT100
(Covrex order code: 515-405)


Self adhesive PT100

Trouble shooting PT100:

You can measure the resistance of the sensor with an Ohm-meter.
A good PT100 wil show +/-100Ω at 0°C, +/-103.9 at 10°C, +/-107.8 at 20°C, +/-111,5 at 30°C
Klick here for the complete temperature vs resistance value table.

User Manual NL/DE/FR

User Manual FR

POOLCONTROL-USERMANUAL-2020-A5-FR-NL-DE.pdf
POOLCONTROL-USERMANUAL-2019-A5-FR-EN_Final.pdf

Instructional Video's